Spin and Serves

How to get crazy spin in ping pong?

How to get crazy spin in ping pong: brush the ball thinly, accelerate at contact, stay relaxed, use the right part of the bat and keep your rubber grippy.

On this page
  1. The short answer
  2. Where spin comes from
  3. Six keys to heavy spin
  4. Getting heavy spin on serves
  5. Getting heavy spin on loops
  6. Does equipment matter?
  7. How to tell if you’re getting more spin
  8. Drills
  9. Common mistakes

The short answer

To get crazy spin in ping pong, brush the ball thinly instead of hitting through it, accelerate sharply at the moment of contact, and keep your grip and wrist relaxed until just before you touch the ball. Use your legs and body on loops, and your wrist and forearm on serves. A clean, grippy rubber helps, but technique matters much more.

Where spin comes from

Spin comes from friction between the rubber and the ball. When your racket moves across the ball rather than straight through it, the rubber grips the ball’s surface and makes it rotate.

Two things decide how much spin you get:

  1. How fast the racket is moving at contact.
  2. How much of that speed goes into rotation rather than forward speed, which comes down to how thin your contact is.

A thin, fast brush gives heavy spin. A thick, fast hit gives a fast ball with less spin.

Six keys to heavy spin

  1. Brush, don’t hit. Aim to graze the ball’s surface. A light, crisp brushing sound usually means a good spin contact, and a loud, solid “knock” usually means a thicker hit.
  2. Accelerate at contact. Keep the start of the stroke smooth and controlled, then speed up sharply as you reach the ball. Racket speed at contact is what counts.
  3. Stay loose, then snap. A tense grip slows the racket down. Hold it loosely, and let the fingers and wrist firm up and snap through just at contact.
  4. Use the right part of the racket. On wrist-driven serves, many coaches suggest contacting the ball toward the tip of the blade, because that part moves fastest when the wrist rotates.
  5. Contact the right part of the ball. For topspin, brush up the back and over the top. For backspin, brush under the bottom. For sidespin, brush across the side.
  6. Use your body. On loops, power comes from the legs, hips and waist, not just the arm. Bend your knees, rotate, and transfer your weight into the stroke.

For how the different spins behave once you’ve created them, see our guide to the different spins in table tennis.

Getting heavy spin on serves

Serves are the easiest place to create heavy spin, because you control the ball completely.

  • Loosen your grip. Many players hold the racket mainly with the thumb and index finger for serving, which frees the wrist.
  • Drop the ball low. Contacting at or below net height gives you room to brush.
  • Use a short, fast wrist and forearm action. Big arm swings add speed, not spin.
  • Keep forward speed low on short serves, so most of the racket speed turns into rotation.
  • Toss a little higher once you’re comfortable. The ball falls faster, which can help racket speed at contact, but it’s harder to time.

For full serve technique, see our guide to playing spin serves and serve strategy. For an extreme backspin example, see the ghost serve.

Getting heavy spin on loops

  • Let the ball drop slightly against backspin, so you can brush up its back.
  • Swing more upward than forward for a spinnier, slower loop, and more forward for a faster loop with less spin.
  • Close the racket slightly and brush up and over the ball. Don’t open it wide.
  • Generate speed from the legs and waist. The arm finishes the movement.
  • Make thin contact. Heavy-spin loops often feel as if the ball barely touched the rubber.

Does equipment matter?

Equipment matters less than technique, but it does play a part:

  • Grippy rubber. Inverted (smooth) rubbers with a grippy or tacky topsheet generally make spin easier. Worn rubber loses grip.
  • Clean rubber. Dust and sweat reduce grip. Many players clean their rubber with a dedicated cleaner or a slightly damp cloth, following the rubber maker’s advice.
  • Sponge. A sponge that suits your stroke speed helps the ball sink in and grip. Very hard sponges can feel unforgiving if your stroke isn’t fast enough.
  • Rules. In sanctioned competition, rubbers must be on the approved list under the table tennis rules, and after-market boosters or speed glue are not permitted.

Replacing old rubber can make a noticeable difference. Buying the most expensive rubber won’t fix a flat contact.

How to tell if you’re getting more spin

  • Watch the ball’s markings. With heavy spin, the logo blurs. With light spin, you can see it rotating.
  • Bounce-back test. Serve heavy backspin with low forward speed. If the ball stops or comes back toward the net after bouncing, you’re creating real backspin.
  • Partner feedback. Ask your partner whether your serves and loops are getting harder to return.
  • Listen. A thin, crisp contact sound usually means more spin than a dull knock.

Drills

  1. Bounce-up brush. Bounce the ball upward on your racket using only brushing contacts. Try to make it spin, not just rise.
  2. Spin-back serve. Serve backspin onto your own side of the table and try to make the ball roll back toward you.
  3. Slow spin loops. Have a partner feed backspin and loop it slowly with as much spin as you can. Speed comes later.
  4. Towel target serves. Combine heavy spin with placement, so you don’t give up control for spin.

Common mistakes

  • Swinging hard but hitting flat. You get speed instead of spin.
  • A death-grip on the racket. It slows your wrist and fingers.
  • Contact too high on serves. The ball goes up and long.
  • Opening the racket too much on topspin. The ball sails long.
  • Chasing spin with equipment instead of technique.

Once you can create heavy spin, the next step is controlling it in matches. For the receiving side of things, see our guide to handling spin with racket angle.

The complete guide to spin and serves

Different Spins in Table Tennis: Topspin, Backspin and Sidespin
Read the guide

Keep exploring

Guides from other topics

All topics →