To return a spin serve in table tennis, read the spin from the server’s racket movement and the ball’s flight, judge whether the serve is short or long, then set your racket angle and pick a stroke that either counters the spin or overpowers it with your own. Commit to the stroke. A hesitant return usually lets the spin decide where the ball goes.
The rest of this guide breaks that down. If you want a quick summary instead, see our shorter answer on how to return a spinning serve.
The two ways to return a spin serve
There are two broad approaches, and good receivers use both:
- Adjust to the spin. Work out what the spin wants to do to the ball and set your racket to cancel it out. Against backspin, which wants to drop into the net, you open the racket and lift.
- Overpower the spin. Put so much of your own spin on the ball that the incoming spin matters less. A strong loop or a well-played flick can carry the ball over the net whatever spin was on it.
Former world champion Werner Schlager is widely quoted on the second idea. His point was that the less sure you are of the incoming spin, the more spin you should use yourself.
Beginners usually rely on the first approach, and that’s fine. As your strokes improve, the second becomes more useful.
Get ready: stance and position
- Stand roughly an arm’s length or a little more from the table, slightly toward your backhand side if your forehand is stronger.
- Knees bent, weight forward on the balls of your feet.
- Racket in front of you, relaxed, neither tilted strongly to forehand nor backhand.
- Be ready to step in with your playing-side foot under the table for short serves, and to step back for long ones.
Many players lose points on serve return because they’re flat-footed, not because they misread the spin.
Step 1: read the spin
Focus on the moment of contact, not the flourishes before and after it. Servers often add fake motions to hide what they did.
- Racket moving down and under the ball suggests backspin.
- Racket moving up and over the ball suggests topspin.
- Racket moving across the ball suggests sidespin, and the ball will tend to come off your racket in the direction the server’s racket was moving.
- A slow or “pushy” contact with little wrist may mean no-spin.
Then confirm with the ball’s flight:
- Backspin tends to stay low, slow down and sometimes check after bouncing.
- Topspin tends to come through faster and skip forward.
- Sidespin curves and can kick sideways.
For more on how each spin behaves, see our guide to the different spins in table tennis.
Step 2: judge the length
- A short serve would bounce twice on your side if left alone. You can’t take a full swing at it, so you’ll touch, push or flick.
- A long serve would bounce once on your side and go past the end line. You have room to loop or drive it.
- A half-long serve is borderline: its second bounce would be near your end line. Decide early, and take it at the top of the bounce if you’re going to attack.
A good habit is to watch the first bounce on the server’s side. A first bounce near the net usually means a short serve, and one near their end line usually means long.
Step 3: choose a return by spin
Backspin serves
Short backspin:
- Short push (touch): open racket and soft hands. Brush lightly under the ball so it bounces twice on the server’s side.
- Long push (dig): open racket, with a firmer, longer forward motion. Aim deep, ideally to a corner or the elbow.
- Flick: a wrist-driven attack over the table. Against heavy backspin you need to brush upward, not hit flat.
Long backspin:
- Loop: the most common choice. Get low and brush up the back of the ball with plenty of upward motion.
- Push: a safe option if your loop against backspin isn’t reliable yet, but it hands the initiative back to the server.
If your returns against backspin go into the net, you need a more open racket, more upward brush, or both.
Sidespin serves
The key is to aim against the drift. If the ball wants to come off your racket to your left, aim further to the right, and vice versa.
- Short sidespin: push or touch with your racket angled slightly to counter the drift, or flick it while going a little more through the ball.
- Long sidespin: attack with a loop, aimed toward the middle of the table for margin. Strong topspin overrides much of the sidespin.
Most sidespin serves also carry some backspin or topspin, so adjust your racket’s openness as well as its sideways angle. Our guide to handling sidespin and racket angle goes into detail.
Topspin serves
- Short topspin: a flick is the usual choice. Close the racket so the ball doesn’t fly up. Skilled players sometimes cut down the back of the ball with a near-vertical racket, but that takes very good touch.
- Long topspin: loop it or block it with a closed racket. Take it early, before it drops below table height.
Pushing topspin with an open racket is the classic way to give away an easy high ball.
No-spin serves
No-spin serves are designed to look like backspin. If you push them with a very open racket, they tend to pop up.
- Use a less open racket than you would against backspin.
- Push more forward and less under.
- Against a long no-spin serve, a firm drive or loop works well because there’s little spin to fight.
See no-spin (knuckle) serves for why these are so effective.
Where to place your return
A safe return in a bad place still loses points. Some simple targets:
- Deep to a corner with long pushes, to push the server back.
- Short to the forehand with touches, which is often awkward for the server to attack.
- At the playing elbow, especially with flicks and loops, to force a quick decision.
Watch where the server stands after serving. Many servers move to set up a forehand attack, which can leave their wide forehand or backhand exposed.
Fix it from the miss
When you get a return wrong, the miss tells you what to change:
| What happened | Likely cause | Try this |
|---|---|---|
| Ball went into the net | More backspin than you read | Open the racket more, or brush upward more |
| Ball flew long or high | Topspin or no-spin, racket too open | Close the racket, play more forward |
| Ball went off the side | Sidespin drift | Aim further to the opposite side |
| Ball popped up softly | No-spin read as backspin | Use a flatter racket and push forward |
| Mishit or frame hit | Late decision or poor footwork | Step in earlier and commit to one stroke |
Adjust one thing at a time, and give it a few points before you change again.
Drills for better serve return
- One-serve receive. Your partner serves only short backspin. You practise touch, dig and flick returns in turn.
- Guess the spin. Your partner mixes backspin and no-spin from the same motion. You call out the spin before you play the ball.
- Long-serve surprise. Your partner serves mostly short, with an occasional fast long serve. You practise staying ready to step back.
- Return plus fourth ball. Return the serve, then play the next ball as well. This trains you to recover after the return.
- Serve practice of your own. Learning to play spin serves yourself teaches you a lot about what servers are trying to hide.