The Short Answer
The degree number on a rubber, such as 40°, 47.5° or 50°, describes how hard the sponge is. A higher number means a harder sponge.
- Softer sponges are easier to compress. They feel more forgiving, give more arc on slow and medium strokes, and suit developing players and players with shorter, gentler strokes.
- Harder sponges need a faster, stronger stroke to compress. When you can do that, they give more speed, a more direct feel and more power on full strokes.
The catch is that brands don’t all use the same scale. European, Japanese and Chinese numbers aren’t directly comparable, so only compare numbers within the same brand or region.
What the Degree Number Measures
Hardness is measured with a durometer, which presses a small probe into the material and reads how much it resists. The result is given in degrees. A higher reading means the sponge resists compression more.
Manufacturers don’t always measure the same way. Some measure the sponge on its own, others may measure with the topsheet in place, and devices and methods differ. That is one reason the numbers are only a guide.
Why the Numbers Don’t Match Between Brands
There are three broad conventions:
- European (often called the German or ESN scale): used by most European brands, including Tibhar, Andro, Donic and Joola. Numbers are typically in the 35–55 range.
- Japanese: used by brands such as Butterfly and Nittaku. Numbers usually look lower than European ones for a similar feel.
- Chinese: used by brands such as DHS and Yinhe. Chinese numbers also tend to look lower than European ones.
Here’s an example. Butterfly lists Tenergy 05’s sponge at 36, and players often compare it to around 47–48 on the European scale. A DHS Hurricane 3 sponge listed at 39° or 40° plays like a hard rubber, not a soft one, even though the number is lower than a “medium” European sponge.
You’ll sometimes see conversion rules of thumb. Treat them as rough, because the measuring methods and the rubbers themselves differ. The safest approach is:
- compare hardness within one brand or one region’s scale
- read player reviews that compare a rubber to well-known reference rubbers
Hardness Bands at a Glance
On the European scale, these bands are a reasonable guide:
| European degrees | Description | Typical feel | Typical users |
|---|---|---|---|
| Below about 40° | Soft | Very forgiving, high arc, easy to engage | Beginners, control-oriented and older players |
| About 40–44° | Medium-soft | Forgiving, good spin on slow strokes | Developing players, many backhands |
| About 45–47.5° | Medium | Balanced speed and control | Most club players |
| About 48–50° | Medium-hard to hard | Faster, more direct, needs a good swing | Stronger attackers, many forehands |
| Above about 50° | Very hard | Needs fast, full strokes | Advanced players with powerful technique |
Some product names encode the number directly. Andro’s Rasanter line, for instance, includes R42, R47, R50 and R53, and Tibhar sells Evolution MX-P at 47.5° and an MX-P 50 version. Butterfly lists sponge hardness on its own scale: Rozena at 35, Tenergy 05 at 36 and Dignics 05 at 40.
How Hardness Changes Play
Soft sponge
- Engages on slow strokes. The ball sinks in easily, so even gentle strokes get good grip and spin.
- Higher, safer arc on loops and topspin drives.
- More dwell time, the feeling that the ball stays on the racket a little longer.
- Bottoms out on hard strokes. When you hit very hard, the sponge fully compresses and the ball reaches the blade. That limits top-end power and can make the response feel inconsistent.
- Can feel livelier on blocks against fast, heavy topspin, because the sponge compresses so easily.
Hard sponge
- Needs a fast swing. On slow strokes it can feel dead, with a low arc and little spin.
- Strong top-end speed and spin when you compress it properly, with less risk of bottoming out.
- More direct, crisp feel and often a lower, flatter flight.
- Less forgiving of late or off-balance strokes.
A useful way to think about it: choose the hardest sponge you can compress consistently on the strokes you play most. If you only compress it on your best shots, it is too hard.
Other Things That Change How Hard a Rubber Feels
- Topsheet. A thick, stiff topsheet makes the whole rubber play harder than its sponge number suggests. This is common with tacky Chinese rubbers. A thin, elastic topsheet can make a hard sponge feel more forgiving. For more on this, see Chinese tacky vs European tensor rubbers.
- Pore structure. Larger-pored sponges often feel softer and bouncier than fine, dense sponges listed at a similar hardness.
- Thickness. A thicker sponge of the same hardness has more depth to compress, so it bottoms out less easily. See table tennis sponge thickness.
- Temperature. Rubber and sponge tend to feel softer and livelier in a warm hall and harder in a cold one.
- Age. As a rubber wears, it can lose some of its springiness, and the feel changes.
- Batch variation. Hardness can vary a little from sheet to sheet. This is something players often mention with Chinese rubbers, which are commonly sold in several hardness options (for example, Hurricane 3 is often listed in a range of roughly 37° to 41°).
Which Hardness Should You Choose?
By level
- Beginners: soft to medium-soft, roughly 40–44° on the European scale or the softer options in a brand’s range.
- Intermediate players: medium, around 45–47.5° on the European scale, with harder options on the forehand once your stroke is reliable. See the best rubbers for intermediate players.
- Advanced attackers: often 47.5° and up on the forehand, depending on swing speed and preference.
By swing
- Short, compact strokes or a light build: softer sponges are easier to activate.
- Long, fast, full-body strokes: harder sponges give more reserve before bottoming out.
By wing
Many players use a slightly harder rubber on the forehand and a slightly softer one on the backhand. The forehand is usually the longer, stronger stroke, and the backhand is usually played closer to the table with less time.
Hardness, Thickness and Blade Together
Hardness doesn’t work alone:
- Soft sponge + thick sponge gives a forgiving, high-arc rubber that resists bottoming out.
- Hard sponge + thin sponge gives a very controlled, low rubber that needs a confident stroke.
- Stiff or carbon blades are fast and direct. Many players pair them with medium or softer rubbers to keep the racket manageable.
- Flexible all-wood blades add dwell time of their own. They often pair well with medium to harder rubbers.
If your racket feels too fast and bouncy, a softer or thinner sponge is usually the cheaper fix. If it feels dead on your strongest strokes, try one step harder or one step thicker, not both at once.
Reading a Spec Sheet: Worked Examples
- “Tensor, 47.5°, 2.0 mm”: a medium European tensor in a common thickness. This is a typical club-level forehand or backhand choice.
- “Tensor, 42.5°, 1.8 mm”: soft and controlled. This suits a developing player or a backhand that values touch.
- “Chinese tacky, 39°, 2.15 mm”: likely to play hard despite the low-looking number, because of the Chinese scale and stiff topsheet. Best for a strong forehand.
- “Japanese tensor, 36”: around the hardness of Tenergy 05, often thought of as medium on European terms.
When in doubt, compare a new rubber to one you already know from the same brand. That tells you more than the number alone. For an overview of where hardness fits among other rubber choices, see types of table tennis rubber.