Strokes

Loop Drive in Table Tennis (Drive vs Loop Explained)

The difference between a drive, a loop and a loop drive in table tennis, how to play a forehand loop drive against backspin and topspin, and drills to practice.

On this page
  1. Drive vs Loop: The Short Answer
  2. What Is a Drive?
  3. What Is a Loop?
  4. What Is a Loop Drive?
  5. Drive vs Loop vs Loop Drive
  6. How to Play a Forehand Loop Drive
  7. Backhand Loop Drive
  8. When to Drive and When to Loop
  9. Common Loop Drive Mistakes
  10. Loop Drive Drills
  11. FAQ

Drive vs Loop: The Short Answer

A drive is a fairly flat, forward stroke with light topspin, played close to the table against balls that already carry topspin. A loop is a brushing stroke that swings low to high to create heavy topspin, which makes the ball arc and then dip onto the table. A loop drive sits between the two: a fast loop that brushes the ball for topspin but also sends it forward with real speed.

The difference comes down to contact. A drive hits through the ball. A loop brushes it. The loop drive does a bit of both.

What Is a Drive?

The drive (also called a counter-hit) is the first attacking stroke most players learn. Typical features:

  • Compact backswing at about table height.
  • Swing mainly forward, slightly upward.
  • Racket slightly closed.
  • Contact more directly on the back of the ball.
  • Flatter, faster trajectory with light topspin.

Drives work well against topspin balls of medium height, especially in fast close-to-table rallies. They’re less effective against backspin: a flat forward hit on a backspin ball tends to go into the net.

What Is a Loop?

A loop is a topspin stroke in which the racket grazes the ball, generating heavy spin. Compared with the drive:

  • The backswing starts lower, often around knee or thigh height against backspin.
  • The legs, hips and waist do more of the work.
  • The racket brushes up and forward along the back or top of the ball.
  • The ball travels in a higher arc, then dips and kicks forward after the bounce.

Coaches often describe two ends of a spectrum:

  • Spin loop (slow loop): very upward swing, maximum spin, moderate speed. Typically used against heavy backspin to lift the ball safely.
  • Loop drive (fast loop): more forward swing, strong topspin plus speed. Used to attack.

What Is a Loop Drive?

A loop drive is a loop with more forward direction and power. You still brush the ball, so it has strong topspin, but you also put more of the racket “through” the ball. The result is a fast, relatively low ball that dips onto the table and is hard to block cleanly.

In the modern game, especially since the switch to the larger plastic ball, the loop drive is the standard attacking stroke for most intermediate and advanced players.

Drive vs Loop vs Loop Drive

Drive Spin loop Loop drive
Contact Mostly hit Mostly brush Brush plus hit
Swing direction Forward Mostly upward Upward and forward
Backswing height Table height Low Low to medium
Spin Light topspin Heavy topspin Strong topspin
Speed Fast Slow to medium Fast
Arc Flat High Medium
Best against Topspin, medium height Heavy backspin Long pushes, half-long balls, topspin
Distance Close Close to mid Close to mid

How to Play a Forehand Loop Drive

These steps are for a right-handed shakehand player. Left-handers mirror them.

1. Stance

Feet wider than shoulder-width, right foot back, knees bent more than for a drive. Weight is on the balls of the feet. Against backspin, you need to get lower.

2. Backswing

Turn your waist and hips to the right and shift your weight onto your right leg. Let the racket drop to around knee or thigh height against backspin, or a little higher against topspin. The arm stays relaxed, with the elbow slightly bent. The backswing comes from turning the body, not from yanking the arm back.

3. Contact against backspin

  • Racket only slightly closed, or close to vertical, depending on how heavy the backspin is.
  • Contact the back of the ball, around the middle or slightly above.
  • Swing upward and forward. The heavier the backspin, the more upward the swing and the more you brush.
  • Contact at the top of the bounce or as the ball starts to fall. This gives you time and a stable ball.

4. Contact against topspin

  • Racket more closed.
  • Contact higher on the ball, toward the top.
  • Swing more forward than upward.
  • Brush through the ball rather than hitting flat.

5. Power chain and follow-through

Push off the right leg, rotate the hips and waist to the left, and let the upper arm, then forearm, then wrist follow in sequence. Many coaches emphasize a fast forearm contraction at impact. Finish with the racket around head height in front of you, weight on your left foot, then recover.

Backhand Loop Drive

The backhand loop drive follows the same idea in a more compact form:

  • Racket starts low, in front of or between the knees, with the wrist slightly curled.
  • The elbow acts as a pivot and moves slightly forward.
  • The forearm and wrist snap up and forward to brush the ball.
  • Legs and a small amount of waist rotation add power.

It’s shorter and quicker than the forehand, and it’s very effective against long pushes to the backhand. See our backhand technique guide for the basics first.

When to Drive and When to Loop

  • Ball has backspin (push, chop, backspin serve): loop. A drive will usually go into the net.
  • Ball is low and long: loop. The arc gives you net clearance.
  • Ball has topspin, medium height, close to the table: drive or loop drive.
  • Ball is high: consider a smash instead.
  • Opponent’s loop is coming at you: block it or counter-loop. See how to counter-loop and how to block.

Larry Hodges at Butterfly points out that when you’re about to loop a push, it helps to decide your approach in advance: loop with whichever side the push goes to, favor the forehand, favor the backhand, or go all-out forehand. Each has trade-offs in coverage and positioning.

Common Loop Drive Mistakes

Problem Likely cause Fix
Ball into the net vs backspin Racket too closed, swing too forward, or contact too late Open the racket slightly, lift more, take the ball at the top of the bounce
Ball long vs topspin Racket too open or swing too upward Close the racket and swing more forward
Little spin Hitting flat instead of brushing Contact the ball thinly; feel the rubber grip it
No power Arm-only stroke Start from the legs, rotate the hips
Off balance Stance too narrow, not low enough Widen the stance, bend the knees

Loop Drive Drills

  1. Multiball backspin loop. The feeder sends backspin to your forehand. Loop every ball, focusing on lift and spin before speed. (See how to run a multiball session.)
  2. Push-to-loop. You serve backspin, your partner pushes long to your forehand, and you loop. Then play the point out, or stop.
  3. Loop-to-block. You loop continuously against your partner’s block. This trains loop drives against topspin.
  4. Backhand push, forehand loop. Push to the backhand, then step around and loop with the forehand. It combines footwork with looping.
  5. Random push, then loop. Your partner pushes long to any spot. You decide forehand or backhand loop, as in Hodges’s mental approaches.

FAQ

Is a loop the same as topspin?

All loops are topspin strokes, but not every topspin stroke is a loop. A drive also has light topspin. “Loop” usually refers to the brushing stroke that creates heavy topspin.

Do I need special rubber to loop?

You can loop with almost any inverted (smooth) rubber. Grippy, spin-oriented rubbers make it easier to generate spin, but technique matters far more than equipment at the beginner and intermediate level.

Which should I learn first, the drive or the loop?

Most coaches teach the drive first, because it builds timing and a stable racket angle. The forehand technique guide covers that foundation. The loop usually comes once you can rally consistently.

The complete guide to strokes

Types of Shots in Table Tennis: Every Stroke Explained
Read the guide

Keep exploring

Guides from other topics

All topics →