Rubbers

Types of Table Tennis Rubber: Inverted, Pimples, Anti and More

A clear guide to every type of table tennis rubber: inverted, tensor, tacky, short pips, long pips and anti-spin, with how each one plays and who it suits.

On this page
  1. The Four Main Families at a Glance
  2. How a Rubber Is Built: Topsheet and Sponge
  3. Inverted (Pips-In) Rubber
  4. Short Pips
  5. Medium Pips
  6. Long Pips
  7. Anti-Spin Rubber
  8. OX and Hardbat Rubber
  9. Comparison Table
  10. What the Rules Say About Rubbers
  11. Which Rubber Type Should You Choose?

The Four Main Families at a Glance

Nearly every table tennis rubber fits into one of four families:

  • Inverted (pips-in): a smooth, grippy surface with the pimples facing inward toward the sponge. It is the most common type by a wide margin and the best at generating spin.
  • Short pips (pips-out): the pimples face outward, so the ball touches the pimple tips. It makes less spin but reacts less to the opponent’s spin, which suits fast, flat hitting.
  • Long pips: taller, thinner outward pimples that bend on contact. They tend to send the opponent’s spin back in confusing ways and are popular with defenders and blockers.
  • Anti-spin: looks like inverted rubber, but the surface is very slick. It produces almost no spin of its own and reacts very little to incoming spin.

Inside the inverted family there are important sub-types (classic, tensor, Chinese tacky and hybrid), and there are a few niche options such as medium pips and sponge-less “OX” sheets. Each is covered below.

How a Rubber Is Built: Topsheet and Sponge

Most rubbers have two layers glued together:

  1. The topsheet. This is a single layer of rubber with pimples on one side. Whether the pimples face in or out, and how tall and wide they are, decides most of the rubber’s character.
  2. The sponge. This is a foam layer between the topsheet and the blade. It stores energy when the ball hits it and gives it back, so it controls much of the speed and the feel.

A sponge can be very thin, thick, soft or hard. Thickness and hardness change how a rubber plays as much as the brand does. They have their own guides: see sponge thickness: max vs 2.0mm vs 1.8mm and what rubber hardness numbers mean.

Inverted (Pips-In) Rubber

With inverted rubber the smooth side faces out and the pimples are hidden against the sponge. The flat surface gives a large contact area and high friction. That makes it the easiest rubber to loop, serve and push with heavy spin. The trade-off is that it also reacts strongly to whatever spin the opponent sends, so reading spin matters more.

Inverted is the default for beginners and for the large majority of club and professional players, usually on both sides of the racket. Inverted sheets still play very differently from each other, though.

Classic and Control Inverted

These are traditional sheets without much built-in tension, such as Yasaka Mark V and Butterfly Sriver. They feel direct and fairly predictable, they are not especially fast, and they show plainly when a stroke was poorly timed. That is why coaches often recommend them for developing players.

Tensor Rubbers

Tensor rubbers are made with tension built into the topsheet and sponge. That gives a “catapult” effect: the ball comes off the racket faster, with less effort, and often with a higher arc. Most modern European and Japanese attacking rubbers are tensors. Examples include Tibhar Evolution MX-P, Andro Rasanter, Xiom Vega, Nittaku Fastarc and Butterfly’s Tenergy and Dignics lines. Tensors are grippy rather than sticky, and they are generally lighter than Chinese rubbers.

Chinese Tacky Rubbers

Chinese rubbers such as the DHS Hurricane series have a sticky topsheet that can briefly lift a ball off a table, and usually a hard, dense sponge. They throw the ball lower and feel more linear: soft strokes go short and slow, while full strokes produce a lot of spin. They reward a long, committed forehand and can feel dead to players who are used to tensors. The full comparison is in Chinese tacky vs European tensor rubbers.

Hybrid Rubbers

Hybrids combine a tacky or semi-tacky topsheet with a livelier, tensor-style sponge. The goal is the spin and lower throw of Chinese rubber with more help on speed. Several major brands now make them. Butterfly Dignics 09C is a widely known example.

Short Pips

Short pips (often called “pips-out”) turn the topsheet around so the pimples face the ball. Only the tips of the pimples touch the ball, so friction drops. In practice short pips:

  • make less spin than inverted, especially on loops
  • are less affected by incoming spin, which makes fast blocks and hits against heavy spin easier
  • give a flatter, more direct trajectory
  • can produce a slightly “floaty” or wobbly ball that some opponents find awkward

Short pips suit close-to-table hitters and blockers, and they are used most often on the backhand. Some short pips are tuned for spin and others for speed or deception, so descriptions within the category vary quite a bit.

Medium Pips

Medium pips sit between short and long pips in height. They usually give more disruption than short pips while keeping a bit more control and attacking ability than long pips. It is a small category and mainly of interest to players who are already experimenting with pips.

Long Pips

Long pips have tall, thin pimples that bend when the ball hits them. Because they bend instead of gripping, much of the opponent’s spin is returned rather than reversed by the player’s own stroke. A heavy topspin loop blocked with long pips can come back as backspin, for example. This makes them very effective for:

  • classic choppers who defend from away from the table
  • close-table blockers who want to disrupt the opponent’s rhythm
  • players who twiddle (turn the racket) to mix inverted and pips on the same wing

Long pips are often used with a very thin sponge or no sponge at all (OX). They need specific technique. A player who simply swaps an inverted backhand for long pips usually loses control at first. Since around 2008 the ITTF has limited how tall and thin pimples can be relative to their width, and it has banned surface treatments that remove friction. Older “frictionless” long pips are therefore no longer legal in sanctioned play.

Anti-Spin Rubber

Anti-spin looks like an inverted sheet, but its surface is designed to be extremely slick. It barely grips the ball, so:

  • incoming spin has relatively little effect on the return
  • the player’s own stroke adds very little spin
  • returns are often slow, low and carry some of the opponent’s spin back in an unexpected form

Anti is used mainly as a defensive or disruptive backhand, often by players who twiddle the racket. It is less common than long pips, and it rarely makes sense for a player who is still learning the basic strokes. For specific sheets and what to look for, see the best anti-spin table tennis rubbers.

OX and Hardbat Rubber

  • OX means a pimpled topsheet with no sponge. It is common with long pips. It gives maximum control and very little speed, and it makes the rubber’s spin effects stronger.
  • Hardbat means short pips with no sponge, the way rackets were covered before sponge became standard. It is still played in hardbat-specific events and some casual settings.

Sandpaper and other non-rubber surfaces are not legal coverings in ITTF-sanctioned play.

Comparison Table

Rubber type Own spin Speed Sensitivity to incoming spin Typical users
Classic inverted High Low to medium High Beginners, all-round players
Tensor inverted High Medium to very high High Most attackers, club to pro
Chinese tacky Very high (with full strokes) Medium, linear High Strong-forehand loopers
Hybrid High Medium to high High Loopers wanting tacky spin with more help on speed
Short pips Low to medium Medium to high Low Close-table hitters and blockers
Medium pips Low Medium Low Experimental and disruptive players
Long pips Very low (returns opponent’s spin) Low Very low Choppers, blockers, twiddlers
Anti-spin Very low Low Very low Disruptive defenders, twiddlers

These are general tendencies. Individual sheets, sponge thickness and the blade all shift them.

What the Rules Say About Rubbers

For ITTF-sanctioned competition, and in most national associations that follow ITTF rules:

  • Rubber must be on the ITTF list of authorized racket coverings. Approved sheets carry the ITTF logo and an approval number, which should be visible near the handle.
  • A pimpled topsheet used alone (no sponge) may be no more than 2.0 mm thick. Sponge plus topsheet, including adhesive, may be no more than 4.0 mm.
  • One side of the racket must be black and the other a bright color that is clearly different from black and from the ball. Red was the only option for decades. Since 2021, blue, green, violet and pink are also permitted. The reasons are covered in red vs black table tennis rubber.
  • The covering must reach the edges of the blade but not go beyond them. That is why rubber is trimmed after gluing; see how to glue and trim table tennis rubber.
  • Adding anything to the rubber after it leaves the factory, such as boosters, is not allowed under the rules, even though enforcement is limited.

Recreational play has no such requirements, but buying an authorized rubber costs nothing extra and keeps your options open.

Which Rubber Type Should You Choose?

For most people the honest answer is inverted on both sides. It is the most versatile type. It teaches you to make and read spin, and almost all coaching assumes it. Within inverted:

  • Learning the strokes: a classic or soft tensor rubber, in a medium thickness
  • Developing attacker: a medium-hardness tensor (see the best rubbers for intermediate players)
  • Strong, full-swing forehand: consider a Chinese tacky or hybrid rubber on that side
  • Close-table hitter or blocker: short pips on the backhand are worth trying
  • Defender or disruptive blocker: long pips or anti on the backhand, usually with inverted on the forehand

Spin is central to all of this. If the vocabulary is new, the different types of spin in table tennis is a good primer before you buy.

Mixing Types on Forehand and Backhand

There is no rule that both sides must match. A common setup is a faster inverted rubber on the forehand and a softer or thinner inverted rubber on the backhand. Inverted with pips or anti on the backhand is a bigger step. It changes how you play tactically, not just how the racket feels, and it usually needs a period of adjustment.

Thickness and Hardness After You Pick a Type

Once you have chosen a family, sponge thickness and hardness are the next decisions. As a starting point, many developing players do well with 1.8–2.0 mm sponge on inverted rubber. Thicker sponge suits players with fast, well-timed strokes. Pips and anti are often used thinner. Sheet-specific reputation matters too. Premium rubbers such as Tenergy are not automatically right for everyone, as discussed in whether Tenergy 05 is still the best rubber. If you are building a whole racket rather than just choosing rubber, what to look for when buying a table tennis racket covers the blade, the handle and the overall balance.

Keep exploring

Guides from other topics

All topics →