Spin and Serves

Kicker Serve in Table Tennis: How to Do It

What a kicker serve is in table tennis, how it differs from the tennis kick serve, and how to play a side-topspin serve that kicks sideways after the bounce.

On this page
  1. What a kicker serve is
  2. Kicker serve vs. the tennis kick serve
  3. Legal serve reminders
  4. How to do a kicker serve, step by step
  5. Making the ball kick more
  6. Where to place it
  7. Variations
  8. Common mistakes
  9. How receivers deal with it

What a kicker serve is

“Kicker serve” isn’t an official or tightly defined term in table tennis, and players and coaches use it in slightly different ways. In most cases it describes a serve whose spin makes the ball kick, jumping sideways (and often forward) after it bounces on the receiver’s side or as it comes off their racket.

In practice, that usually means a serve with heavy sidespin or side-topspin. The sidespin pushes the ball sideways off the receiver’s racket, and the topspin component makes it skip forward and up. A receiver who blocks it with a neutral racket often sees the ball fly off the side or the end of the table.

If a coach or teammate uses the term differently, go with their meaning. The technique below covers the most common one.

Kicker serve vs. the tennis kick serve

The name probably comes from lawn tennis, where the “kick serve” is a topspin-heavy serve that bounces high and away from the receiver. Table tennis is different:

  • In table tennis you don’t want the ball to bounce high. A high bounce is easy to attack.
  • The “kick” in table tennis is mostly sideways or forward, and it shows most when the ball meets the receiver’s racket.

So don’t copy the high, looping arc of a tennis kick serve. A good table tennis kicker stays low.

Whatever motion you use, the serve must be legal under the table tennis rules. In summary:

  • Toss from an open, flat palm, behind the end line and above table height.
  • Toss nearly vertically so the ball rises at least 16 cm.
  • Strike it as it falls.
  • Keep the ball visible to the receiver throughout. Don’t hide contact with your body or free arm.

For a fuller explanation, see our guide to playing spin serves and serve strategy.

How to do a kicker serve, step by step

This version uses a forehand pendulum-style motion to create side-topspin. The steps are for a right-hander; mirror them if you’re left-handed.

  1. Stand side-on near your backhand corner, knees bent and weight slightly forward.
  2. Loosen your grip. Holding the racket mainly between the thumb and index finger frees the wrist.
  3. Toss the ball nearly vertically, at least 16 cm.
  4. Set the racket near vertical, tilted slightly forward (closed).
  5. Swing across the ball from right to left, as in a pendulum serve.
  6. Brush across and slightly upward on the back-side of the ball. The upward element adds the topspin that makes it kick forward.
  7. Keep the contact low, around net height, so the ball stays close to the net.
  8. Accelerate at contact. Most of the spin comes from the last few centimetres of racket movement.
  9. Recover quickly to your ready position.

If the pendulum motion is new to you, start with our pendulum serve tutorial. For the opposite sideways kick, use the same idea with a reverse pendulum or a backhand serve.

Making the ball kick more

  • Brush thinner. A grazing contact produces more spin than a solid hit.
  • Use the tip area of the blade. On wrist-driven serves, the part of the racket farthest from your wrist moves fastest.
  • Add upward brush. More topspin gives a stronger forward kick.
  • Keep rubbers clean. Dusty or worn rubber grips the ball less.
  • Don’t overhit. Too much forward speed turns spin into pace.

For general spin-building tips, see how to get crazy spin in ping pong.

Where to place it

  • Half-long or long to the backhand. The side-topspin makes a block hard to control.
  • Short to the forehand. This can draw a weak flick that drifts wide.
  • Fast to the playing elbow. The receiver has to decide between forehand and backhand while dealing with the kick.

Vary the length. A kicker that’s always long is easy to prepare for.

Variations

  • Side-backspin kicker. Brush across and slightly under the ball. The ball still deflects sideways off the receiver’s racket, but it drops instead of jumping up. Mixing the two from the same motion is a strong combination.
  • Pure sidespin. Brush straight across the back of the ball. This is useful as a middle option between the other two.
  • Reverse kicker. Use a reverse pendulum or backhand motion so the ball kicks the other way.

Common mistakes

  • Serving high. The kick is wasted if the ball sits up.
  • Too much forward hit. You get speed without spin.
  • Contacting the ball too early. Let it fall to a lower point.
  • A big arm swing. It makes the serve easy to read and harder to control.
  • No follow-up. Side-topspin serves usually come back quickly, so be ready.

How receivers deal with it

Good receivers handle a kicker by:

  • Closing the racket against the topspin.
  • Aiming against the sideways drift. If the ball wants to go to their left off the racket, they aim further right, and vice versa.
  • Attacking it, if it’s long, with their own topspin to overpower the incoming spin.

Our guide on how to return a spin serve explains these adjustments, which are also useful to know as the server, so you can anticipate the return.

The complete guide to spin and serves

Different Spins in Table Tennis: Topspin, Backspin and Sidespin
Read the guide

Keep exploring

Guides from other topics

All topics →